The D660 monolithic, charge-pump voltage inverter converts a +1.5V to +5.5V input to a corresponding -1.5V to -5.5V output. Using only two low-cost capacitors, thecharge pump’s 100mA output replaces switching regulators, eliminating inductors and their associated cost, size, and EMI. Greater than 90% efficiency over most of its load-current range combined with a typical operating current of only 120µA provides ideal performance for both battery-powered and board-level voltage conversion applications.The D660 can also double the output voltage of an input power supply or battery, providing +9.35V at 100mAfrom a +5V input.
A frequency control (FC) pin selects either 10kHz typ or 80kHz typ (40kHz min) operation to optimize capacitor size and quiescent current. The oscillator frequency can also be adjusted with an external capacitor or driven with an external clock. The D660 is a pin-compatible, high-current upgrade of the ICL7660.
The D660 is available in SOP8 package .

Features

· Small Capacitors
· 0.65V Typ Loss at 100mA Load
· Low 120µA Operating Current
· 6.5Ω Typ Output Impedance
· Guaranteed ROUT< 15Ω for C1=C2=10µF
· Pin-Compatible High-Current ICL7660 Upgrade
· Inverts or Doubles Input Supply Voltage
· Selectable Oscillator Frequency: 10kHz/80kHz
· 88% Typ Conversion Efficiency at 100mA (IL to GND)

Applications

·Laptop Computers
·Medical Instruments
·Interface Power Supplies
·Hand-Held Instruments
·Operational-Amplifier Power Supplies

Product manual

Product Consultation

Action

Remove

Name

Tel

E-mail

Inquiry content

Submit inquiry